Call us:518 478-9513

Heating and Cooling

HVAC

Tangora Technologies, Inc. (TTI) designs, installs and services all brands of residential and commercial heating and cooling equipment for new or existing construction. TTI has the ability to assess and evaluate new or existing heating and air conditioning (HVAC) systems to help improve capacity and energy efficiency

TTI is a certified Bryant heating and cooling contractor. TTI is a factory trained Wirsbo radiant heating systems contractor. In addition, TTI installs the most highly efficient systems available today. (See Case Studies).

TTI provides residential and commercial water heaters including: atmospheric or power vented standard tank style or On Demand Solutions from Bradford White, Navien and Rinnai. Whether your needs are storage or instantaneous, we provide the right solution.

We are on the cutting edge of technology and products. We provide excellent service, quality products, and strive for complete customer satisfaction. Let us show you what service is. Contact us today for a free estimate for any of your domestic hot water needs.


Furnace Facts

Your Furnace Works Harder Than You Might Think!

Based on the average winter degree-days in our area, the average furnace is firing approximately 2,700 hours each year.


Heating Installation

Tangora Technologies, Inc. stands behind our reliable and precise installations. We are the dependable choice for your heating installation or replacement needs because we provide expert consulting, complete equipment sizing, and system selection, as well as, state of the art controls to maximize comfort and energy efficiencies. We are a certified Bryant dealer, installer, and service provider. We install gas furnaces, boilers, radiant heat, humidifiers, air cleaners, programmable thermostats, including wi-fi thermostats. We provide on going service and support after the installation. Relax and let the team at Tangora Technologies Inc take care of your installation. Contact us for a free estimate to provide, update or replace your heating system. 


Heating Service

Tangora Technologies Inc. provides 24/7/365 service for all brands of residential or commercial heating equipment. Whether it is a small furnace heating an apartment or a large rooftop heating an office complex let Tangora Technologies Inc. show you what you should expect from a service provider. With over 30 years in the industry either myself and or staff can assist you in any situation from normal preventative maintenance to emergency service. We will be honest, trustworthy and reliable from the get go. Most of the time we can prevent service calls with our Preventative Maintenance Agreements )PMA'S) but if you turn up the heat and it doesn't seem to come on check our Furnace FAQ's for some tips. If you still need us just call us anytime day or night at 478-9513 or email Mike directly at michael@tangoratechnologies.com anytime.


Boiler Replacements

Let Tangora Technologies Inc show you the latest in boiler technology.  We offer traditional cast iron to super high efficiency wall hung cabinet style design. With lower total system water volumes and increased combustion efficiencies it is likely that a replacement boiler can offer as much as a 30-40% reduction in energy costs to what you may be currently experiencing now. We have taken great strides in selecting the right manufacturers to partner with to offer todays highest energy efficiencies and stand behind the manufacturers warranties as the most reliable out there. TTI offers complete design, installation and service for any new or replacement boiler. TTI works with many other manufacturers to dial in the right product for the job. Call Heather now to book your free estimate or contact Heather via email at heather@tangoratechnologies.com to schedule an appointment.


Heating FAQ’s

Simple Things to Try Before Calling Tangora Technologies Inc.

You can always count on Tangora Technologies Inc. for help and service. But here are a few simple things to try before scheduling a technician visit to your home:

Gas Furnace Equipment Checklist

1. Check to make sure that your thermostat is set in the "heat" position.

2. Make sure that the temperature setting on the thermostat is set above (or higher than) the indoor temperature showing on the thermostat.

3. Ensure that there is power to the furnace. Try turning the fan to "ON" using the fan switch on the thermostat to test for power to furnace.

4. Check the circuit breakers at the electrical panel.

5. Check the SSU switch (it looks like a light switch on a gray box located at the furnace) to be sure it is in the "ON" position.

6. Check to ensure the furnace filter is not in need of replacement. All one-inch thick furnace filters should be replaced monthly. Wider two-inch thick and other high-capacity pleated filters can most likely be changed every other month or just six times per year.

7. If the system is running but you have not changed your filter, the filter needs to be replaced.

8. Check all return air grilles to make sure they are not blocked by furniture. Check all supply air registers to make sure they are open and blowing air. (The return air grilles are normally located on your walls and are wide and flat).

If these checklists do not solve your problem, contact your Tangora Technologies Inc at 518-478-9513 for service or email heather@tangoratechnologies.com .


Preventative Maintenance

Our service starts with 24-hour availability. Emergencies happen. Tangora Technologies, Inc. services all models, and provides expert solutions to your heating issues. Our philosophy is to make your home comfortable and energy efficient along the way. Plus, our expert technicians perform preventative maintenance service to keep your systems running smoothly and efficiently to avoid the unexpected mechanical issues.

Tangora Technologies Inc provides Preventative Maintenance Agreements (PMA'S) for both residential and commercial gas forced air and hot water heating equipment. TTI provides a complete inspection on the appliance which includes:

Boilers

  • Full inspection of heat exchanger (Brush, Vacuum and Clean if Necessary)
  • Check Ignition Controls, Burners and Pilot Assembly if applicable
  • Check all condensate drains, traps and pumps if applicable
  • Check all hydronic devices in system:  relief valve, expansion tank, water feeder, circulator(s), zone valves(s), low water cut-off
  • Check all high and low voltage connections and controls including: circulator relays, zone valve relays, burner control ignition controls
  • Cycle any and all thermostats in heating mode and check full operation

Furnaces

  • Full inspection of heat exchanger (Brush, Vacuum and Clean if Necessary)
  • Check Ignition Controls, Burners and Pilot Assembly if applicable
  • Check indoor blower motor, blower wheel and blower housing
  • Check all condensate drains, traps and pumps if applicable
  • Check all high and low voltage connections and controls including: main circuit board, blower relay, burner control and ignition controls
  • Cycle any and all thermostat in heating mode and check full operation

Typically our PMA covers the full tune-up on your heating appliance and provides gauranteed priority customer service, safety inspection and improved efficiencies

To find out more about Tangora Technologies Inc Preventative Maintanance Agreements (PMA'S) or to schedule your PMA please contact Heather Tangora at 478-9513 or via email at heather@tangoratechnologies.com


Furnace Replacements

Let Tangora Technologies Inc. show you how replacing your furnace may be the best investment that you can make for your home or building. We provide the latest in technology offering the industries highest in energy efficient furnaces out there today. With Bryant Model 987MA 98% efficient gas fired modulating furnaces you can save as much as 40% off your normal utility bills by dialing directly into the amount of BTU's required to heat your home or office space. This is accomplished when the furnace is paired up with an Bryant Evolution Control.  


Carbon Monoxide Emergencies

Carbon Monoxide or commonly referred to as CO, is known as the silent killer. It is caused typically by pour combustion from a fuel oil, propane or natural gas heating or hot water system. It can strike new or old appliances at any time, ranging from plugged vents or chimneys, low gas pressure, malfunctioning burner parts, or plugged air intakes simply due to a bees or birds nest. We wanted to express our concern for you and the importance of why you should have at least one operational CO in your premises. NYS code requires, for each residential dwelling, one CO detector per floor. Not only do we provide Preventative Maintenance Agreements (PMA's) for all brands of heating and hot water systems but, we provide basic battery style CO detectors and hard wired low or high voltage CO detectors that integrate into new or existing alarm systems. Call us today if you have any questions or concerns. We are here to help and provide excellent service for you. Contact Heather to schedule an onsite appointment to have CO detector installed. It could save your life! Heather@tangoratechnologies.com.

What the Numbers Mean

Reading of 9 PPM or less:

  • Inform the occupants that our investigation did not detect any elevated level of CO at this time.
  • Recommend occupants check their CO detector per manufacturer recommendations.
  • Attempt to reset detector.
  • Inform occupants that if detector activates again to call 911.

Reading of more than 9PPM, but less than 100 PPM:

  • Any reading equal to or greater than 9 PPM will be considered above normal reading.
  • Occupants will be informed that we have detected a potentially dangerous level of CO.
  • Recommend that all persons leave the premises and to set up ventilation. Gas powered ventilation fan will not be used.
  • If it is determined that an appliance is malfunctioning and thereby producing CO, it will be shut down and ventilation will begin.
  • Once the premise has been reduced to a safe level of CO, the premises may be occupied-at the discretion of the occupant.
  • Attempt to reset the detector.
  • The occupants will be informed of the actions taken and recommendations for correction.
  • Inform occupants that if the detector activates again to call 911.

Reading of 100 PPM or greater:

  • Any reading of 100 PPM or greater inform the occupants that we have detected a potentially lethal level of CO.
  • Order the occupants to leave the premises immediately and to get up ventilation. Gas powered ventilation fan will not be used.
  • If it is determined that an appliance is malfunctioning and thereby producing CO, it will be shut down and ventilation will begin.
  • Once the premises have been reduced to a safe level of CO, the premises may be occupied at the discretion of the occupant.
  • An attempt will be made to reset the detector.
  • The occupants will be informed of the actions taken and recommendations for correction.
  • Inform occupants that if detector activates again call 911 if reset has occurred.


News

It’s Time…Furnace and Boiler Tune-ups read more

Award winners! read more

Do you want to eliminate your home phone line for your security system…. read more

TTI becomes Universal Remote Control’s newest Total Control Dealer… read more

TTI teams up with IpDatatel to provide complete Cellular and IP solutions…... read more



Recent Posts

Is Your Home Ready for the Future? read more

It all Starts with Wire read more